Home      Linkage Products      Spherical Rod Ends        Metric Rod Ends       Ball Joints       HVAC Damper Control Swivels     Control Rods       Spherical Bearings         Threaded Ball Studs       Wheel Fasteners     Heavy Duty Wheel Bolts & Studs        Medium & Heavy Duty Wheel Bolts & Studs      Wheel Nuts      Slotted Bearing & Pinion Hex Nuts      Lubrication Fittings                              Heavy Duty Double Ended Rim Studs and Nuts        Fasteners for Brake Drum Assemblies                                 Locking Hex Head Six Slot Place Bolts Grade 8 GM Type AA    Metric Hex Head SEMS Caps Screws Class 8.8"   
Two Piece Wheel Nuts        

• SERIES DC DAMPER CONTROL SWIVEL BALL JOINTS were developed specifically for use by the heating and air conditioning industries. They are designed for use with both 1/4" and 5/16" dia. connecting rods.

• SERIES DC DAMPER CONTROL SWIVEL BALL JOINTS  are fitted with self-locking set screws which provide high holding strength. In laboratory tests, they withstand over 400 pounds of push or pull on the connecting rod with the set screw fully torqued.

• SERIES DC DAMPER CONTROL SWIVEL BALL JOINTS  are made of low carbon steel and zinc plated, The set screws are surface hardened and a Buna N rubber disc provides smooth, vibration-free operation.

• Optional nut and lock washer (KEPS) nut is available for the stud end.

• Series DH DAMPER CONTROL SWIVEL BALL JOINTS are ideal for use with threaded rods in low cycling applications. They are cross drilled for either 1/4" or 5/16" threaded rod.

• Series DH DAMPER CONTROL SWIVEL BALL JOINTS are designed specifically for control applications where infinite adjustment is desired along the length of the threaded control rod. Accurate Vernier adjustments can be made with two simple jam nuts.

• Series DH DAMPER CONTROL SWIVEL BALL JOINTS are made of low carbon steel and zinc plated. A Buna N rubber disc provides smooth, vibration-free operation.

                    Contact Us